HDMI/VGA/NTSC/PAL Display - 7" Diagonal - 1280x800 IPS

7 Zoll Display mit 1280x800 Auflösung, VGA, HDMI and Composite Eingängen (NTSC/PAL), 290 Gramm

Verfügbarkeit: Lieferbar - Sofort-Versand ab Lager

CHF 154.90
Adafruit

Beschrieb

Details

NEW! We've updated this product to be even better, now with ultra high resolution, wide viewing angle and HDMI/VGA/NTSC/PAL input

Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI/VGA display with high-res, high-contrast visibility. The visible display measures only 7" (17.8cm) diagonal, and the TFT comes in an enclosure with HDMI, VGA and Composite inputs. The display is very easy to use - simply connect the included 12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports. Voila, a television display! There's some little buttons on the front that let you enter a menu system for adjusting brightness, color and contrast. It auto-detects which input you have and switches to that one or you can 'select' from the menu which to display. It comes with a basic stand (shown) and there are four 'mounting thread' holes in the back in a 75mmx75mm square and you can use M4 screws to attach it to an enclosure. There's also a "Camera Mount" 1/4-20 hole in the bottom so you can attach it to a camera-ready mount.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI or SECAM.

For use with a Raspberry Pi we suggest editing config.txt to set "hdmi_safe=1" output for best results (otherwise, the Pi may not 'recognize' the HDMI display and revert to composite output).

For use with a BeagleBone black, we found it works when plugged in, no configuration required. You may need a mouse/keyboard to keep the Bone display from going into 'sleep mode'

A 9V US-prong power adapter is included. The power supply may vary from the one shown in the photo, but it will definitely have a US 2-prong plug and will be a switching supply that can be used with 110-240VAC. We also powered it with 12V and it worked fine, and it might work at 5V.

Power with 5-24VDC
700mA power draw at 12V
16:10 display ratio
Resolution: 1200 x 800
Visible area: 150mm x 95mm 16:10
Brightness: 400cd/m2
Contrast: 800:1
We opened up one of the displays and found an HSD070PWW1 inside, we expect that all of TVs have this display or something similar
Auto-detects between VGA, HDMI and Composite
Display plastic case dimensions: 180mm x 130 x 30
Weight (excluding power cable): 290g/10.2oz

Details & Downloads

Details & Downloads

Artikelnummer 10021
Hersteller Adafruit
Garantie (Monate) 24

Bewertungen

Schreiben Sie Ihre eigene Kundenmeinung

Nur registrierte Kunden können Bewertungen abgeben. Bitte melden Sie sich an oder registrieren Sie sich

Versand

Heute bestellt - morgen geliefert

Alle Bestellungen (bis 14.00h) werden gleichentags verschickt (Zahlungseingang vorbehalten).

Sämtliche Lieferungen werden mit der Schweizer Post per A-Post oder per B-Post ausgeliefert. Wir verrechnen eine Versandpauschale von Fr. 6.90 bzw. Fr 8.90.

Bei Bezahlung mit PostFinance oder Kreditkarte (VISA, MasterCard) fallen Gebühren in Höhe von Fr. 1.00 plus 2% bzw. mit PayPal in Höhe von 2.5% (mindestens Fr. 1.50) an.