UDOO NEO FULL

UDOO NEO is an all-in-one open hardware low-cost computer equipped with a Freescale™ i.MX 6SoloX applications processor for Android and Linux.

UDOO NEO embeds two cores on the same processor: a powerful 1GHz ARM® Cortex-A9, and up to a 200Mhz Cortex-M4 I/O real-time co-processor.

While the Cortex-A9 can run both Android™ Lollipop and UDOObuntu 2, a dedicated Ubuntu-based Linux distro, the Cortex-M4 allows easy access to a full-stack Arduino™ environment. The snap-in connector ensures a plug-and-play interaction with most sensors and actuators.

Thanks to its embedded 9-axis motion sensors and Wi-Fi + Bluetooth 4.0 module, the board is ideal to create robots, drones and rovers as well as any Mobile IoT project your imagination desires.

NOTE: Temperature and barometric sensor are included!

Verfügbarkeit: Lieferbar - Sofort-Versand ab Lager

CHF 74.90
Udoo

Beschrieb

Details

The most complete tool for wireless mobile IoT applications. 
UDOO NEO FULL is the best, all-in-one solution for wireless mobile IoT applications. 

You can use it as a Headless Device, exploiting the USB and Ethernet ports and the Wireless Connectivity - a powerful Wi-Fi b/g/n and the newest Bluetooth 4.0. You can also use it as a computer, thanks to its 1GB of RAM. The board is compatible with most Arduino shields, sensors and actuators. UDOO NEO FULL is also compatible with UDOO Bricks: programmable modules, like the temperature sensor and the barometric sensor, that you can add to make UDOO NEO FULL even more versatile. Both modules are included.

UDOO NEO FULL can be powered in three ways. You can use: 

- A standard 12 volts power supply, we recommend this one;

- A Micro USB cable like the one we have in our USB Kit;

- Any USB battery pack available on the market.

Full Specs

  • Freescale™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
  • Integrated 2d/3d graphics controller
  • RAM 1GB
  • Micro HDMI interface - LVDS interface + touch (I2C signals)
  • Analog camera connection supporting NTSC and PAL - 8-bit parallel camera interface
  • MicroSD card slot onboard - 8-bit SDIO interface
  • HDMI audio transmitter - S/PIDF & I2S
  • 1x USB 2.0 Type A ports - 1x USB OTG (micro-AB connector)
  • Fast ethernet RJ45 – 10/100Mbps - Wi-Fi 802.11 b/g/n,Direct Mode SmartConfig and Bluetooth 4.0 Low Energy
  • 3x UART ports - 2x CAN Bus interfaces
  • 8x PWM signals - 3x I2C interface - 1x SPI interface - 6x multiplexable signals
  • Power Supply: 5 V DC Micro USB, 6-15 V DC Power Jack, RTC Battery Connector
  • Green Power Status LED - User Configurable LEDs (Red and Orange)
  • Integrated Sensors: 3-Axis Accelerometer - 3-Axis Magnetometer - 3-Axis Digital Gyroscope - 1x Sensor Snap-In I2C connector
  • Dimensions: 89mm x59mm (3.50″ x 2.32″)
  • Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields
  • 32 extended GPIOs (A9 dedicated) - 22 arduino GPIOs (M4 dedicated)
  • 6 available Pins
  • Android Lollipop & Linux UDOObuntu2 (14.04 LTS)

Details & Downloads

Details & Downloads

Artikelnummer 20026
Hersteller Udoo
Garantie (Monate) 24

Bewertungen

Schreiben Sie Ihre eigene Kundenmeinung

Nur registrierte Kunden können Bewertungen abgeben. Bitte melden Sie sich an oder registrieren Sie sich

Versand

Heute bestellt - morgen geliefert

Alle Bestellungen (bis 14.00h) werden gleichentags verschickt (Zahlungseingang vorbehalten).

Sämtliche Lieferungen werden mit der Schweizer Post per A-Post oder per B-Post ausgeliefert. Wir verrechnen eine Versandpauschale von Fr. 6.90 bzw. Fr 8.90.

Bei Bezahlung mit PostFinance oder Kreditkarte (VISA, MasterCard) fallen Gebühren in Höhe von Fr. 1.00 plus 2% bzw. mit PayPal in Höhe von 2.5% (mindestens Fr. 1.50) an.